SWITCHING / grafting ALA VIETNAM for Adenium

Connection of Vietnam-style, so named because the technology at first discovered and usually done by farmers in Vietnam.
Connection of this is the easiest way for beginners, because it does not need to hone the ability to cut a V shape or the number 7 inverted, between scion and rootstock are identical, but only horizontally cut both scions and rootstocks.
One drawback is, how this connection can not be used if the stem above is too small or too young, and can not be done for entrees top (meristem). The link is due primarily to the case, not easy to do the binding of the stem of the rootstock. How it works a la Vietnam connection is as follows:
Prepare all the equipment (the same way as any other connection).

   1. Cut the stem below the horizontal, about 2-3 cm above the cob.
   2. Create a bond in the lower stem with a plastic rope in preparation for the tie rod above.
   3. Cut the stem above the horizontal (plot rootstock), then cut the top too, so the entrees into a cylindrical piece, with a height of 1-2 cm.
   4. Glue the stem above the cylinder on the rod down, and plastic rope that has been attached to the shaft bottom, tied around the stem up through the top of the cylinder in a cross, and fastened back on the rootstock.
   5. Close the connection field, give the label.
   6. two weeks after the grafting, shoots begin to grow. At this stage, let the plastic ties remain firmly attached, up to 1-2 months.

SWITCHING / grafting Insert for Adenium

Connect inline rootstock usually done if you want to connect, its size more than 2 x folding in diameter than the upper stem. It could be if there is such a thing, made an incision rootstock V shape as usual, but the rod of which is inserted in the incision can be two or three bars, namely at the edge of the left, center and right. This can be done easily on grafting Adenium, Adenium not because berkambium and all cells are living cells or meristematik, so all fields can be used for the connection area, unlike the woody plants, which, if connected, then the cambium must meet with the cambium.
However, continued with the letter V with a few entrees that included at one rootstock, would reduce the beauty of the end result. Therefore, if the lower stem are much bigger than the stem upper or entrees, it is usually done by way of connecting insert, the lower stem created a pyramid upside down from the edge of the stem until the appropriate thickness of the upper stem. The rootstock can be inserted up to more than two entress around the outer circumference of the trunk.
Connect the insert would produce a more beautiful plants as rootstock seemed to issue a branch at the cut stem.
SWITCHING / grafting Insert ONE EYE
Connection of one eye, is one way to efficiency, that is to multiply the plants quickly, with limited entrees owned. Rootstock to be used, still have to cut the stem, to avoid apical dominance or the dominance of main stem growth. The order of works is as follows:

   1. Prepare the upper stem. Try to keep the stem on a leaf (leaf no cut). Unless the eye was no leafy shoots again.
   2. Cut the root stock or rootstock, approximately 2-3 cm above the cob.
   3. Peel the stem side down, forming the number 7 is reversed.
   4. Cut the stem of one eye (with leaves), field line number 7 in the stem upside down
   5. Glue the entrees on the lower stem, and tied with plastic straps. Make sure the buds do not come attached. Further continuation of plastic covered, and labeled on the varieties and dates of grafting.
   6. Two weeks after the process, the buds begin to emerge from the entrees. If emerged shoots from the rootstock, shortly before it grows bigger discarded, because it will reduce the growth rates of shoots of entrees.

Grafting technique for Adenium

Grafting technique is a way that is often used to reproduce, or make for a colorful flowered Adenium in one stem Adenium.
The following are the steps, follow and enjoy the results:

1. Use a sharp knife and sterile. It is very important to avoid failure due to fungi, bacteria or other impurities.
2. Cut Rootstock Stem such as the V character around 1-1.5 inches.
3. Descendants Cut carefully so it will be in accordance with the rootstock.
4. Use a small plastic tape or plastic to bind the union.
5. Wrap with plastic bags to keep moisture
6. Adenium put you in the shade or paper is used to prevent excess heat inside the plastic bag.
7. Remove the plastic bag after 10 to 15 days.
8. Remove the tape after the grafting union really well established. Usually takes 15 to 30 days.

How to Make Adenium Splendour of Flowers

Intensif treatment,yes...you need to treat your adenium specially.
1.Choose the healty plant,good bump,and grow up normaly.
2.Use cocopeat,burned chaff,sand,and compost(dung).With comparison 3:3:3:1
3.Cut all of crowns to appear bud.
4.Do fasting water.Spray the water once on three days,until adenium start to appear flowers.
5.Give Gandasil B,Hyponex,twice a week.
Finaly, enjoy your beautiful adenium

 .